Temp and smart plans

The weather information is not accurate for my area, typically up to 10f off during the day. Is there anyway to connect to a private weather station like with Weather Underground. There is a couple Ham operators in my town that have weather stations that are accurate to my location and that data is available if it can be accessed… Not getting accurate weather information makes it difficult to set a smart plan based on temperature. I have a rain gauge coming but could not find a wireless temperature gauge for the Rainpoint Model HTV210B.

Hi,

Thank you for your message.

The weather data utilized within the application is sourced from an online weather service based on your current location.
To enhance the accuracy of the built-in weather data, we recommend taking the following steps:

  1. Users must grant location permissions to the app so that it can identify your home’s geographical location and retrieve corresponding online weather forecast data.
  2. Please verify the accuracy of the location displayed within the app; if it appears inaccurate, tap to refresh and obtain a precise location fix.

To assist you more effectively, please provide your Gateway model number (if applicable). This will allow us to check if there are compatible temperature and humidity sensors available to integrate with your system for monitoring local environmental conditions.

Thank you for your understanding and support.

Sincerely,
RainPoint Customer Support Team

The only thing I found was in the location permissions in Android I had it set for “Ask every time” so I changed it to “Allow while using the app”. The gateway I am using is the The Smart Hub Pro that was included with the HTV210B. In the past I have found out that using weather apps is not very accurate in this location for temperature but I do know which direction it generally tends to get hotter and which direction it generally gets cooler. So I moved my home location in the hotter direction until the temps matched in the afternoon. Morning, night temperatures I ignore as those do not need monitoring.

The moisture part of the moisture/temp gauge is something I would not use since I have no grass yard (it’s rocked with planting beds using drippers and small sprayers,dribblers) and soils from clay to compost and too many plants and areas to feasibly monitor anyway. But the temperature part I could use if it allows smart plans by temperature only. It gets hot and dry here and anything approaching 100f and over I increase watering time to twice daily as the ground drys out quickly.

There is a cooling effect from ocean winds that cool part of the region I live in but the farther you get from that area the hotter it gets. There called the Delta winds. So the temps in the region can vary depending on how much cooling we get from the ocean winds and how far you are away from them and can vary quite a bit in a short distance. It’s not like the temp stabilizes over a large region. I am guessing, but that might be the reason for the discrepancies in temp that the Ham Operators(localized data) are reporting and the temperature data reported from official weather data agencies.

Dear Rob,

Thank you for your follow-up feedback.

Compatible Sensor for Your HTV210B+023 Smart Hub Pro System:
You can use the RainPoint HCS014 Temperature and Humidity Sensor. Please place it outdoors (for example, under an eaves or in a sheltered spot protected from rain and direct sunlight) to measure the actual temperature in your immediate vicinity.

Once the sensor has been successfully paired with the gateway, you can create smart scenes based on its temperature readings (e.g., “If the outdoor temperature > 100°F, water for 10 minutes”).

:backhand_index_pointing_right: Purchase Link for the Temperature Sensor: Remote Outdoor Sensor for Wifi Weather Stations – BALDR Electronic

For connection instructions, please refer to this video: https://www.youtube.com/watch?v=fRiQhyCqOwg&list=PLOUGxY_wJOY_usQGOsyiqSHCvPDb5amMY

Thank you for your understanding and support.

Sincerely,
RainPoint Customer Support

1 Like

I purchased the sensor. Thanks.